機械設計制造及其自動化論文，論文編號:JX1465  論文字數:15093.頁數:40

 摘     要
 逆向工程是現代產品設計的新技術，具有復雜曲線、曲面設計功能，在產品開發方面所表現出來的快捷性使其在制造業中迅速得到了推廣和普及，在工業產品和藝術品的造型設計中得到廣泛應用。本文介紹了逆向工程的的特點以及逆向工程的應用領域及發展前景。主要介紹了剃須刀點云逆向設計，在這里通過Imageware軟件對給定的點云數據—剃須刀進行點云預處理，點塊分析，曲面構建，曲面調整等操作獲得大致的模型，運用誤差分析驗證所做模型是否合格，最后把生成的曲面導入到UG中做最后的處理。
 關鍵詞：逆向工程   剃須刀   逆向設計   Imageware   UG 
Abstract
 The reverse-engineering is the modern product design new technology, has the complex curve, the surface design function, in the product development aspect displayed quick enables it to obtain the promotion and the popularization rapidly in the manufacturing industry, obtained the widespread application in the manufactured products and in the artware modelling design. This article introduced the reverse-engineering characteristic as well as reverse-engineering application domain and prospects for development. Mainly introduced the razor blade cloud reversion design, to the spot cloud data - razor blade which assigns carries on the cloud pretreatment in here through the Imageware software, selects the block analysis, the surface construction, operations and so on surface adjustment obtains the approximate model, the utilization error analysis confirmation makes the model to be whether qualified, finally inducts the production surface to UG in does final processing.
 key word: Reverse-engineering；Razor blade；Reversion design；Imageware； UG
目  錄
 摘     要 I
 Abstract II
 目  錄 III
 第一章 緒論 1
 1.1  逆向工程的定義 1
 1.2  逆向工程的研究和發展 2
 1.3  逆向工程技術的實施 3
 1.3.1 逆向工程技術的硬件概況 3
 1.3.2 逆向工程技術的軟件概況 3
 1.3.3 逆向工程的特點 4
 1.3.4逆向工程設計前的準備工作 5
 1.3.5 逆向工程中應該注意的問題 5
 1.3 6 逆向工程的應用 6
 第二章  數據轉換和處理 7
 2.1 軟件及點云簡介 7
 2.2 零件結構分析 7
 2.3 數據采集(產品數字化) 7
 2.4 Imageware的實例應用 7
 2.5 Imageware逆向工程軟件的主要產品 8
 2.6 Imageware制作產品流程 8
 第三章 反求工程實例 10
 3.1  剃須刀整體數據處理 10
 3.1.1  測量數據輸入 10
 3.1.2  剃須刀點云數據處理 11
 3.1.3  剃須刀表面的制作 13
 3.2 剃須刀的細節處理 19
 3.3 UG中的后處理 29
 第四章 誤差分析 31
 第五章 總 結 34
 致 謝 35
 參考文獻 36
 附錄A     外文翻譯 A-1
           圖紙  A-2