機械設計制造及其自動化論文，論文編號:JX1095  論文字?jǐn)?shù):18134.頁數:47

摘     要
 離合器面片磨床機床是一臺專用機床。
 主要加工的工件為直徑在150～450 mm范圍內的離合器面片。機床屬于磨床一類的。磨削面片的精度在±10μm之內。金鋼石砂輥連續磨削，首先磨背面，分粗磨1、粗磨2，精磨三個磨輥，然后，離合器面自動翻身進入另一臺設備磨正面，分粗磨精磨二個磨輥。此設計努力提高生產線的機械化、自動化水平，確保生產質量，最大限度地提高勞動生產率，降低運行成本
 這次機床的設計共分三大部分組成，一是機床的結構、機床的外形的設計，二是磨床的磨頭及其調整機構的設計，三是機床的變速機構、傳送機構及其動力設備的設計
 
關鍵詞：機床 磨床 離合器面片 金剛石砂輥 輸送帶。
Abstract
 This machine is a special machine.
 Clutch disc is the main processing unit of the work-pieces . The clutch disc's diameter is within the 150 ～ 450 mm . This  machine  belongs to a category of Grinder. The accuracy of the machine is ± 1 0 μ m. Diamonds sand roller continuous grinding, grinding back first, there are three grinding head,the first and second is the rough grinding,the third is the finish grinding. Then, the clutch disc is automatically emancipated face into another piece of equipment to grinding positive.There are two grinding head,the first is the rough grinding,the second is the finish grinding. This design efforts to improve production line of mechanization and automation level to ensure production quality, maximize labor productivity, lower operating costs .
 Machine design is divided into three major components . First, design the machine structure and the shape of the machine tool.Second,design grinder grinder and institutional adjustments.Third, design the machine transmission, transmission agency and its power  equipment.
Keywords： machine tools, grinder, clutch disc, diamond sand roller, conveyor目   錄
Abstract 2
第一章 緒   論 5
1.1  選題目的、背景和意義 5
1.2  國內外現狀 5
第二章 機床的總體設計 8
2．1 機床結構的方案的確定 8
2.1.1  磨頭升降機構方案的確定 8
2.1.2  砂輪的驅動簡圖如下 10
2.1.3  傳送帶驅動機構簡圖 11
2.1.4  壓輪機構方案的確定 12
2.2 機床技術參數的確定 13
2.3 砂輪端軸的設計 16
2.3.1  選擇軸的材料 16
2.3.2  軸的剩余軸徑計算 16
2.3.3  軸的強度計算 17
2.3.4  軸的疲勞強度計算 21
2.4  軸端采用雙列深溝球軸承 22
2.5  鍵的計算 24
2.6  蝸輪蝸桿設計 25
2.7  絲桿的設計 26
2.8  手輪的選擇 26
2.9  傳送帶機構的結構設計 26
2.10  砂輪噴砂的面積計算 27
第三章  部件設計 28
3.1  槽鋼和角鋼型號選擇 28
3.2  床身焊接工藝要求 29
第四章  設計總結 31
參考文獻； 33
外文翻譯
文獻綜述